All accepted papers with paid Conference fee will be published in the Conference proceedings and distributed to the participants of the Conference.
Paper proceedings:
- THE INFLUENCE OF BUILD PARAMETERS ON THE COLLAPSE BEHAVIOUR OF A HIGHLY POROUS RANDOM OPEN-CELL LATTICE 3D PRINTED IN IN718 ALLOY
- INFLUENCE OF STRINGER GEOMETRY ON THE STRUCTURAL INTEGRITY OF CRACKED STIFFENED PLATES
- IMPLEMENTATION AND PRACTICAL APPLICATION OF NONEQUIVALENT BIAXIAL MEASUREMENTS FOR HYPERELASTIC MATERIALS
- GRP TANK LOADING INVESTIGATION USING CFS AND DFOS SENSORS
- IDENTIFICATION OF ENERGETIC AND DISSIPATIVE FLOW STRESS USING INFRARED THERMOGRAPHY
- NOVEL TEST METHODS FOR TRIBO/MECHANICAL PROPERTIES IN THE CONTEXT OF ALTERNATIVE FUELS
- THE DEPENDENCE OF THE DEGREE OF NON-ADDITIVITY OF MECHANICALLY LOADED SYSTEMS ON THE LOADING RATE
- IMPACT VELOCITY INFLUENCE ON THE FRACTURE BEHAVIOUR OF PORCINE FEMURS UNDER DYNAMIC LOADING
- EXPERIMENTAL ANALYSIS OF HIGH-SPEED GEARBOXES
- EXPERIMENTAL STUDY OF HEAT EFFECT ON THE DEFORMATIONS OF AL/CU BIMETAL IN 3-POINT BENDING
- DYNAMIC CALIBRATION OF A MODEL OF A MIXED STRUCTURE BRIDGE DECK BASED ON DYNAMIC TESTS OF THE BRIDGE
- CONSTITUTIVE MODELLING OF POLYMER FOAMS USING AN ASYMMETRIC POISSON’S RATIO
- MECHANICAL RESPONSE OF PA6 UNDER ENVIRONMENTAL CONDITIONS: A DUAL APPROACH USING EXPERIMENTS AND NUMERICAL ANALYSES
- COMPARATIVE EVALUATION OF THE ELASTIC MODULUS IN CEMENT PASTES USING ULTRASONIC AND 3-MIN-CREEP TESTING
- EXPERIMENTAL ANALYSIS OF ELECTRIC SOOTER DYNAMICS
- EFFECTS OF STEERING ANGLE SATURATION ON STABILITY OF REVERSING TRAILERS
- MULTITECHNIQUE CHARACTERIZATION OF CEMENT PASTE WITH AND WITHOUT GRAPHENE OXIDE
- ANALYSIS OF TEST STRAIN IN A FOUR-POINT BENDING CALIBRATION SETUP FOR STRAIN GAGES
- STABILITY LOSS OF TAPE-SPRINGS UNDER COMPRESSIVE LOADS: A FINITE ELEMENT ANALYSIS
- EXPERIMENTAL AND NUMERICAL ANALYSIS OF LASER-CUT PNEUMATIC SOFT ROBOT STRUCTURES
- OPTIMISING GAIT STABILITY ANALYSIS IN PATIENTS WITH MUSCULOSKELETAL DISORDERS
- ALTERNATIVE METHOD OF STRESS PARAMETERS DETERMINATION DURING TENSILE TESTS USING METRIC ENTROPY AND DIC
- INFLUENCE OF TEMPERATURE ON MODE I FRACTURE TOUGHNESS OF A DUCTILE ADHESIVE
- INVESTIGATION OF RESIDUAL STRESS EVOLUTION DUE TO CYCLIC LOADING BY YIELD SURFACE TRACKING
- DEVELOPMENT OF CONSTRUCTION FOR THE TRANSFER OF HEAVY PRISMATIC PROFILES
- EXPERIMENTAL DETERMINATION OF THE EFFICIENCY OF A COMPOUND PLANETARY GEARBOX
- EFFECT OF PRIOR CREEP ON TENSILE PROPERTIES OF AA2124/SiC COMPOSITES
- DETERMINATION OF FOUR CHARACTERISTIC REGIONS IN THE STRESS– STRAIN RESPONSE OF APM FOAM UNDER COMPRESSION USING DVC
- DEVELOPMENT OF A TEST DEVICE (FIXTURE) FOR DETERMINING THE PULL-OUT FORCE OF SWAGED BALL TERMINATIONS ON CONTROL CABLES
- QUANTITATIVE DETERMINATION OF GLASS FIBER CONTENT IN FIBER REINFORCED COMPOSITE MATERIALS
- NUMERICAL ANALYSIS OF BARREL LOADS IN THE DESIGN PHASE OF AN ARTILLERY SYSTEM
- AUTOMATION OF CONSTITUTIVE MODEL PARAMETER IDENTIFICATION
- FATIGUE PERFORMANCE COMPARISON OF STRENX 700 AND 55NiCrMoV7 STEELS
- EXPERIMENTAL DETERMINATION OF THE EFFECT OF AXIAL FORCE ON A HEADLESS SCREW CONNECTION
- INITIAL EXPENDABLE TURBOJET PROTOTYPE TESTING EXPIRIENCES
- HARDNESS MEASUREMENT OF ROLLING BEARING BALLS SUBJECTED TO MULTI-CYCLE CRYOGENIC TREATMENT
- EXPERIMENTAL AND ANALYTICAL METHODS FOR DETERMINING INTERLAMINAR SHEAR STRENGTH OF COMPOSITES MADE BY FDM 3D PRINTING
- MEASUREMENT OF PIEZOELECTRIC PROPERTIES OF HYDROGELS
- INFLUENCE OF PALLET PLACEMENT METHOD ON BEAM BEHAVIOR IN RACK STRUCTURE
- ANALYTICAL AND FEM ASSESSMENT OF A DOUBLE-SIDED BUTT WELDED S1000QL SPECIMEN FOR TENSILE TESTING PREPARATION
- QUASI-STATIC TENSILE TESTING OF HIGH-STRENGTH BALLISTIC STEEL USING DIGITAL IMAGE CORRELATION – PRELIMINARY STUDY
- QUASI-STATIC AND DYNAMIC BEHAVIOR OF VANADIUM-CARBIDE REINFORCED ALUMINUM ALLOY STUDIED VIA DIGITAL IMAGE CORRELATION – PRELIMINARY STUDY
- EXPERIMENTAL VALIDATION OF FRICTION STIR WELDING PARAMETERS FOR EN AW 6060 T6 ALUMINUM ALLOY
- RESIDUAL STRESS-INDUCED DAMAGE IN BRAKE DRUMS
- INFLUENCE OF CRACKS ON THE STRUCTURAL STABILITY OF CYLINDRICAL STEEL EQUALIZATION TANKS
- STRUCTURAL ASSESSMENT AND REDISIGN OF THE WATER CHAMBER IN A DOMESTIC GASIFICATION BOILER
- INFLUENCE OF FEED RATE ON SURFACE ROUGHNESS OF AL6088 ALLOY IN THE BALL BURNISHING PROCESS
- EFFECT OF ELECTRON BEAM PROCESSING PARAMETERS ON THE SURFACE ROUGHNESS OF TITANIUM SAMPLES: PART II
- 2D AXISYMMETRIC VS. 3D SOLID ELEMENT PHASE-FIELD DAMAGE MODELING
- ANALYSIS OF DEEP DRAWING PROCESS USING FEA AND FLD
- DEVELOPMENT AND EXPERIMENTAL TESTING OF A HYDRAULIC STAND WITH PUMPS INTENDED FOR A CENTRAL HEATING SYSTEM
- FINITE ELEMENT ANALYSIS OF PLATELET ACTIVATION AND CELL MECHANICS IN CIRCULATING TUMOR CELL ARREST
- CONDITIONS RELATED TO THE ROOF STRUCTURE STRENGTH OF BUSES POWERED BY NATURAL GAS AND FUEL CELLS
- CFD INVESTIGATION OF TURBULENT WATER FLOW IN A PIPE ELBOW: ASSESSMENT OF CAVITATION RISK
- KINEMATIC ANALYSIS OF THE COMPLEX PLANETARY GEAR TRAIN OVERVIEW
- IMPROVEMENT OF THE TECHNICAL AND OPERATIONAL CHARACTERISTICS OF ZA-27 ALLOYS REINFORCED WITH SIC AND AL₂O₃
- CHALLENGES OF ADDITIVE MANUFACTURING IN MACHINE ELEMENT APPLICATIONS